Connecting Wires To Terminals - JVC KW-V230BT Instruction Manual

CONNECTION/INSTALLATION CONNECTION/INSTALLATION
Connection
❏ Connecting wires to terminals
10 A fuse
See page 66.
1
Light blue with yellow stripe (Steering remote control wire)
Yellow (Battery wire)
Red (Ignition wire)
Red (A7)
Yellow (A4)
Connector A
Connector B
* 1 Only for KW-V330BT.
* 2
Only for KW-V235DBT.
3
* For KW-V230BT/KW-V330BT: The appearance of the aerial terminal is different from the illustration.
* 4
For 3 way speaker system connection, see also page 66.
64
USB terminal (1.0 m): See page 65.*
See page 66.
* 2
Purple with white stripe
(Reverse sensor wire)
Light green (Parking sensor wire)
Connecting the ISO connectors
You may need to modify the wiring of
the supplied wiring harness as illustrated
below.
Red
(Ignition wire)
Red (A7)
Unit Vehicle
Yellow Yellow (A4)
(Battery wire)
Default wiring
1
Connect the aerial cord to the aerial
3
terminal.*
Connect to the vehicle's reverse
lamp harness when using the
optional rear view camera.
To the OE remote adapter (not supplied) which is compatible with your car.
• If no connections are made, do not let the cable come out from the tab.
Pin
A4 Yellow
A5 Blue/White
A6 Orange/White
A7 Red
A8 Black
B1/B2 Purple ª / Purple/Black · Right speaker (rear/tweeter)*
B3/B4 Gray ª / Gray/Black ·
B5/B6 White ª / White/Black ·
B7/B8 Green ª / Green/Black · Left speaker (rear/tweeter)*
Connect to the vehicle's parking
brake detection switch harness.
• For best safety, be sure to
3
connect the parking sensor.
Color and functions of Connector A and B
Battery
Power control (12 V
Dimmer
Ignition (ACC)
Ground connection
Right speaker (front/mid range)*
Left speaker (front/mid range)*
350 mA)
4
4
4
4