Cisco ASR 920 Series Installing Manual page 30

Connecting a Cisco ASR 920 Series Router to the Network
Connecting to the EIA Console Port
The US-to-RJ45 adapter cable and the DB9 console cable are not included with the
Note
Cisco ASR 920 Series Router; they can be ordered separately from Cisco.
Note The serial console cable kit is not included with the Cisco ASR 920 Series Router; it is ordered
separately.
To connect a terminal to the EIA Console port on the router, follow these steps:
Connect the USB end of the USB-to RJ-45 cable to the EIA Console port.
Step 1
Connect the RJ-45 end of the DB-9 adapter cable to the USB-to RJ-45 cable, as shown in
Step 2
Figure 3-23 Connecting a Modem to the Cisco ASR 920 Series Router
Label
1
2
Cisco ASR 920 Series Aggregation Services Router Hardware Installation Guide
3-30
1
1
2
3
Component
EIA Console port
USB-to-RJ45 adapter
Chapter 3
4
Label Component
3 RJ-45 to DB-9 cable
4 Desktop or system
Installing the Cisco ASR 920 Series Router
Figure
OL-32751-01
3-23.