Cisco ASR 920 Series Installing Manual page 12

Chapter 3 Installing the Cisco ASR 920 Series Router
Installing the AC Power Cables
Mount the router with the front panel as shown in the following figure.
Figure 3-10 Mounting the Router on the Wall
When mounting the router vertically, ensure that the power supplies are at the top.
Caution
Installing the AC Power Cables
To install the AC power cables in the power supply slots:
Step 1 Attach the AC power retainer chord as shown in the figure below.
Cisco ASR 920 Series Aggregation Services Router Hardware Installation Guide
3-12
OL-32751-01