oticon Safari BTE 13 SP Instructions For Use Manual page 15

Visual indicator
(LED: Light Emitting Diode)
Program When changing program the LED will
change blinking pattern according to the
switch
selected program number.
The volume control is programmed to
Vc preferred
level setting work at a certain level under normal
conditions. When this level is reached by
adjusting the volume control, the LED
initiates a rapid blinking sequence of
5 blinks.
This feature can be disabled.
Audible beeps
When you change program
the instrument will beep
according to the program
selected.
Your volume control is
programmed to work at a
certain level by default. When
this level is reached by
adjusting the volume control,
this is indicated by two short
beeps.
28
Visual indicator
(LED: Light Emitting Diode)
Accessory + microphone:
using
One long blink followed by one short
accessories
with the blink.
hearing
Accessory only:
instrument
(FM, DAI, One short blink followed by one long
blink.
streamer,
Auto phone)
Continuous rapid blinking.
Battery low
warning
Audible beeps
Accessory + microphone:
One low tone beep followed
by one high tone beep.
Accessory only:
One high tone beep followed
by one low tone beep.
Two beeps every 15 minutes.
29