oticon Safari BTE 13 SP Instructions For Use Manual page 14

If the program push-button is enabled and you or your child wants to toggle between
DAI programs, simply use the push-button.
As long as the DAI adaptor is connected to the instrument, two programs (DAI + micro-
phone and DAI only) will automatically be added after the standard programs, which have
been programmed into the hearing instrument by the Hearing Care Professional.
Important notIce
When the DAI cord is connected to equipment plugged into standard wall outlets, this
equipment must comply with IEC-60065, IEC-60601 or equivalent safety standards.
26
Audible and visual indicators
The instrument has two means of status indication, the audible beeps and a visual
indicator (LED). These indicators are configured by your Hearing Care Professional. In the
table below you find an overview of the behavior and the possible configurations of the
indicators.
Visual indicator
(LED: Light Emitting Diode)
Instrument During startup the LED is always lit.
is turned on After startup the LED will blink according
to the active program number when the
instrument is turned ON.
The blinking pattern indicates the
Instrument
is operating program setting:
and program P1: One blink followed by a pause and
then one blink and a pause, etc.
setting
P2: Two blinks followed by a pause and
then two blinks and a pause, etc.
This feature can be disabled.
Audible beeps
The instrument will start up by
playing a jingle indicating that
the battery is working and the
instrument is operating.
No audible beeps.
27