Trouble Shooting - FLORABEST FRMA 36/1 A1 Translation Of The Original Instructions

Trouble Shooting

Problem
Appliance doesn't start
Motor stops
Result unsatisfactory or
motor labours
Blade fails to turn
Strange noises, rattling or
vibrations
Possible Cause
Rechargeable battery (
discharged
Rechargeable battery (
not inserted
Defective release button
( 16) or start lever (
17)
Worn carbon brushes
Defective motor
Grass too long
Blockage by foreign object
Cut height too low
Blade ( 20) blunt
Blade area blocked
Blade ( 20) assembled
incorrectly
Blade ( 20) blocked by
grass
Blade screw ( 21) loose
Blade screw ( 21) loose
Blade ( 20) damaged
Fault Fixing
9) Check the charge status,
charge rechargeable battery
9)
Insert rechargeable battery
Repair by customer services
Set a greater cut height. Lift
the front wheels slightly by
pressing down on the bow-
type handle (
Remove the foreign object
Set a higher cut height
Have the blade sharpened
or replace it
Clean the equipment
Install the blade correctly
Remove the grass
Tighten the blade screw
Tighten the blade screw
Replace the blade
GB IE
18).
21