Changing Ip Address Or Forgotten Admin Password - Planet Networking & Communication VGW-804 User Manual

2.3 Changing IP Address or Forgotten Admin Password

To reset the IP address to the default IP Address "192.168.0.1" (LAN) or reset the login password to
default value, press the reset button on the front panel for more than 5 seconds. After the device is
rebooted, you can login the management Web interface within the same subnet of 192.168.0.x.
After pressing the "Reset" button, all the system data will be reset to default; if possible, back
up the config file before resetting.
Selection of IP Support / Network Connection Type
Reset Button
8-Port SIP Internet Telephony Gateway
21
VGW-800 Series