Device Time Setting - Planet Networking & Communication VGW-804 User Manual

3.2 Device Time Setting

The VGW-800 series supports SNTP with time zone and daylight saving.
Device Setting > Time
Configure Time Setting
Parameter Description:
1 Current Time
2 NTP Time Server
NTP Refresh
3
Interval(sec)
4 Time Zone
5 Daylight Saving
6 Daylight Bias
7 Daylight Start
8 Standard Start
8-Port SIP Internet Telephony Gateway
Current time, date and year display.
SNTP time server IP address
The interval time to sync NTP server in seconds
The time-zone where VGW Series Gateway is located.
- Standard: Use a predefined standard time zone
- Customized: Use a user defined time zone
Auto adjust daylight saving time or not
The offset added to the Bias when the time zone is in daylight
saving time
The date that a time zone enters daylight time
- Month: 01 to 12
- Week Day: Sunday to Saturday
- Apply Week (Day:01 to 05, Specifies the occurrence of
day in the month; 01 = First occurrence of day, 02 =
Second occurrence of day, ...and 05 = Last occurrence
of day)
- Hour: 00 to 23
The date that a time zone enters daylight time
- Month: 01 to 12
24
VGW-800 Series