Sending Faxes; Sending A Fax Manually - Panasonic KX-FL501C Operating Instructions Manual

Sending Faxes

Sending a fax
Adjust the width of the document guides to
1
the size of the document.
Insert the document (up to 15 pages) FACE
2
DOWN until the unit grabs the document and
a single beep is heard.
Display:
3 If necessary, press
repeatedly to select the desired setting
(see below).
Press MONITOR
4
Dial the fax number.
5
Example:
When the fax tone is heard:
6
Press FAX START
handset if you are using it.
OR
When the other party answers your call:
Using the handset, ask them to press their
start button. When the fax tone is heard,
FAX START
press
handset.
To stop transmission
Press .
STOP
To redial the last number
Press REDIAL/PAUSE
If the line is busy, the unit will automatically redial the
number up to 2 times.
During redial, the following will be displayed.
Display:
To cancel redialing, press
Convenient way to send a fax
You can dial the fax number first before inserting the
document. This is convenient if the other party's number
is indicated on the document.
1. Enter the fax number.
The handset must be on the cradle.
2. Insert the document.
3. Press FAX START
32
manually!
STANDARD
RESOLUTION
or lift the handset.
TEL=
TEL=5678901
, and replace the
and replace the
CONNECTING.....
.
WAITING REDIAL
STOP .
.
Document guides
Display
Handset
MONITOR
STOP
FAX START
REDIAL/PAUSE QUICK SCAN START
To select the resolution
Select the desired resolution according to the
type of document.
STANDARD: For printed or typewritten
originals with normal-sized characters.
FINE: For originals with small printing.
SUPER FINE: For originals with minute
printing.
PHOTO: For originals containing
photograph.
PHOTO WITH TEXT: For originals
containing photograph and text.
Using the "FINE", "SUPER FINE", "PHOTO"
or "PHOTO WITH TEXT" setting will
increase transmission time.
If the resolution setting is changed during
feeding, it will be effective from the next
sheet.
The "SUPER FINE" resolution only works
with other compatible fax machines.
Sending from memory
You can press
QUICK SCAN START
instead of
FAX START
document into memory before sending.
After storing, the unit will transmit the
document.
If the document exceeds the memory
capacity (p. 78), sending will be cancelled.
RESOLUTION
to scan the