Table of Contents
Advertisement
Display!
If the unit detects a problem, one or more of the following messages will appear on the display.
Display message
CALL SERVICE
CHANGE DRUM
CHECK DOCUMENT
CHECK DRUM
CHECK MEMORY
COVER OPEN
FAILED PICK UP
FAX IN MEMORY
FAX MEMORY FULL
MEMORY FULL
MODEM ERROR
There is something wrong with the unit. Contact our service
personnel.
There is something wrong with the drum unit. Replace the drum
unit and the other cartridge (p. 68, 69).
The document was not fed into the unit properly. Reinsert the
document. If misfeeding occurs frequently, clean the document
feeder rollers (p. 73) and try again. If the problem remains, adjust
the feeder pressure (p. 72).
The drum unit was not inserted properly. Reinsert it correctly
(p. 12, 13).
Memory (telephone numbers, parameters, etc.) has been erased.
Re-program.
The front cover is open. Close it.
Recording paper was not fed into the unit properly. Reinsert the
recording paper (p. 71).
The unit has a document in memory. See the other displayed
message instructions to print out the document.
Memory is full of received documents due to a lack of recording
paper or a recording paper jam. Install paper or clear the jammed
paper.
When performing memory transmission, the document being
stored exceeds the memory capacity of the unit. Transmit the
entire document manually.
When making a copy, the document being stored exceeds the
memory capacity of the unit. Press
message. Divide the document into sections.
There is something wrong with the modem circuit. Contact our
service personnel.
Error Messages
Cause & solution
STOP
to clear the
(continued)
61
Advertisement
Table of Contents
