Table of Contents
Advertisement
Features Summary
Advanced features
How to set menu options
MENU
1. Press
.
SPEED DIRECTOR
2. Rotate
following is displayed.
Display:
Press
SET
and rotate
SPEED DIRECTOR
feature is displayed.
3. Press
SET
.
Programming table (cont.)
Code
Display & Feature
AUTO DISCONNECT
To answer a call with an extension
telephone in TEL/FAX mode
#49
(p. 47).
ECM SELECTION
ECM stands for Error Correction
#68
Mode. To send a fax even if there
is static interference on the
telephone line.
FAX PAGER CALL
#70
If you have a pager and wish to
know when your unit receives a
fax, activate this feature.
CONNECTING TONE
If you often have trouble when
sending a fax, this feature allows
#76
you to hear connecting tones: fax
tone, ring back tone and busy tone.
58
(cont.)
until the
ADVANCED MODE
until the desired
(The default setting is in bold type.)
!
SPEED DIRECTOR
4. Rotate
desired setting is displayed.
5. Press
SET
.
6. Press
MENU
Note:
Step 4 may be slightly different depending on the
feature.
See page 52 for more details.
Settings
How the unit operates
1. Follow steps 1–3 above.
2. Rotate
ON /
select "ON".
CODE=
0
3. Press
4. Enter your code from 2 to 4 digits,
using 0–9 and
OFF
5. Press
6. Press
This feature is available when the
transmitting/receiving stations are
ON
ECM compatible.
If documents are in memory, clear
them before making the setting
OFF
(p. 42).
See page 49 for details.
ON
OFF
You can confirm the status of the
other party's machine.
ON
If the ring back tone continues, the
other party's machine may not be a
facsimile or may have run out of
paper. Check with the other party.
OFF
The connecting tone volume
cannot be adjusted.
until the
.
SPEED DIRECTOR
.
SET
.
.
SET
.
MENU
to
Advertisement
Table of Contents
