Table of Contents
Advertisement
Automatic Dialing
Storing names and telephone numbers
in ONE-TOUCH
For rapid access to frequently dialed numbers, the unit provides 10 stations of ONE-TOUCH
DIAL keys.
ONE-TOUCH DIAL 1 to 3 can be alternatively used as broadcast keys (p. 36).
Press
DIRECTORY PROGRAM
1
Display:
For ONE-TOUCH DIAL 1–3:
2
Press one of the ONE-TOUCH DIAL keys.
Press
to go to the next prompt.
SET
For ONE-TOUCH DIAL 4–5:
Press one of the ONE-TOUCH DIAL keys.
For ONE-TOUCH DIAL 6–10:
Press
LOWER
TOUCH DIAL keys.
3
Enter the name, up to 10 characters (see
page 19 for instructions).
Example:
Press
.
4
SET
Example:
5
Enter the telephone number, up to 30 digits,
using the dial keypad.
Example:
If you want to enter a hyphen, press
FLASH
.
6
Press
SET
.
To program other stations, repeat steps 2 to 6.
Press
STOP
7
If you press
instead of
STOP
touch label card (see right).
22
DIAL!
.
PRESS STATION
OR USE SPD-DIR
DIAL MODE
, then press one of the ONE-
NAME=John
<S02>=
<S02>=1114497
REGISTERED
PRESS STATION
OR USE SPD-DIR
to exit the program.
DIRECTORY PROGRAM
, you can print the one-
ONE-TOUCH
Display
DIAL
FLASH
(Hyphen)
DIRECTORY PROGRAM
Helpful hint:
You can confirm the stored items on the
display (p. 26) or on the telephone number list
(p. 75).
Note:
A hyphen or a space entered in a telephone
number counts as two digits.
To correct a mistake
Press
or
to move the cursor to the
incorrect character/number, and make the
correction.
To delete a character/number
Move the cursor to the character/number you
want to delete, and press
To print the one-touch label card with
stored names
Press
DIRECTORY PROGRAM
Display:
Press
SET
to start printing.
Put the card in the ONE-TOUCH DIAL
location.
/
LOWER
SET
STOP
(Delete)
.
STOP
in step 7.
PRINT LABEL OK?
YES:SET/NO:STOP
Advertisement
Table of Contents
