Table of Contents
Advertisement
Automatic Dialling
Storing names and telephone numbers into
Telephone
one-touch dial
For rapid access to frequently dialled numbers, the unit provides 6 entries for one-touch dial.
L Station 1 can be used alternatively as broadcast key (page 41).
{FLASH}
{MENU}
(Hyphen)
{<} {>}
1
Press {MENU} repeatedly until the
following is displayed.
2
Select the desired station key.
For station 1:
1. Press station 1.
2. Press {SET}.
For stations 2 and 3:
Press one of the station keys.
For stations 4–6:
Press {LOWER}, then press one of the
station keys.
3
Enter the name, up to 10 characters (see
page 28 for instructions).
Example:
4
Press {SET}.
Example:
30
Station keys
{LOWER}
{SET}
{STOP}
(Delete)
DIRECTORY SET
PRESS STATION OR
b
DIRECTORY SET
PRESS NAVI.
STATION 1
DIAL MODE
[±]
NAME=JOHN
STORE:PRESS SET
<S01>=
5
Enter the telephone number, up to 30 digits,
using the dial keypad.
Example:
L If you want to enter a hyphen, press
{FLASH}.
6
Press {SET}.
L To program other entries, repeat steps 2
to 6.
7
Press {STOP} to exit the program.
Helpful hint:
L You can confirm the stored entries in the
telephone number list (page 73).
Note:
L A hyphen or a space entered in a telephone
number counts as two digits.
To correct a mistake
Press {<} or {>} to move the cursor to the
incorrect character/number, and then make the
correction.
To delete a character/number
Press {<} or {>} to move the cursor to the
character/number you want to delete, and press
{STOP}.
<S01>=1114497
REGISTERED
u
DIRECTORY SET
PRESS STATION OR
b
DIRECTORY SET
PRESS NAVI.
Advertisement
Table of Contents
