Displaying Event Records - Toshiba GRE110 Instruction Manual

I e * * .
I s e * * .
I 1 * * .
I 2 * * .
I 2 / I 1 * * .
T H M * * *
0 1 / J a n / 2 0 1 1
1 8 : 1 3 : 5 8 .
A R C - S 1
0 1 / J a n / 2 0 1 1
1 8 : 1 3 : 5 9 .
O C 1 , A R C -
To clear all the fault records, do the following:
• Open the "Record" sub-menu.
• Select "Fault" to display the "Fault" screen.
• Select "Clear" to display the following confirmation screen.
C l
E N D = Y
• Press the END (= Y) key to clear all the fault records stored in back-up RAM.
If all fault records have been cleared, the "Latest fault" screen of the digest screens is not displayed.
If the metering value exceed the displayable digits, the metering value indicate maximam value and
"*" at the right of unit.
Note: When changing the units (kA/A) of primary side current with RSM100, press the "Units"
button which is indicated in the primary side screen.
4.2.3.2

Displaying Event Records

To display event records, do the following:
• Open the top "MAIN MENU" screen by pressing ENTER key.
• Select "Record" to display the "Record" sub-menu.
• Select "Event" to display the "Event" screen.
/ 2
＞ V i
C l
* * k A
* * * k A Not available for model 400 series.
* * k A
* * k A
* *
. * %
0 3 1
0 3 1
F T
e a r r e c o r
C A N C E L = N
E v e n t
e w r e c o r
e a r
 89 
d s
d
6 F 2 T 0 1 7 2