Pixit For Time And Time Synchonisation Model - Toshiba GRE110 Instruction Manual

PIXIT for TIME AND TIME SYNCHONISATION model

ID Description
Tm1 What quality bits are supported
(may be set by the IED)
Tm2 Describe the behavior when the time
synchronization signal/messages are
lost
Tm3 When is the time quality bit "Clock
failure" set?
Tm4 When is the time quality bit "Clock
not synchronised" set?
Tm5 Is the timestamp of a binary event
adjusted to the configured scan cycle?
Tm6 Does the device support time zone
and daylight saving?
Tm7 Which attibutes
response packet are validated?
Value / Clarification
N LeapSecondsKnown
N ClockFailure
Y ClockNotSynchronized
The quality attribute "ClockNotSynchronized"
will be set to TRUE.
N.A.
It
synchronization. Typically 120 seconds
N
Y
Support time zone only.
of the SNTP Y
N
N
Y
Y
N
 341 
depends on the
Leap indicator not equal to 3?
Mode is equal to SERVER
OriginateTimestamp
value sent by the SNTP client as
Transmit Timestamp
RX/TX timestamp
checked for reasonableness
SNTP version 3 and/or 4
other (describe)
6 F 2 T 0 1 7 2
condition of
is equal to
fields are