Displaying Records; Displaying Fault Records - Toshiba GRE110 Instruction Manual

To move the cursor downward or upward for setting or for viewing other lines not displayed on the
window, use the ▼ and ▲ keys.
To return to the higher screen or move from the right side screen to the left side screen in Appendix
E, press the END or CANCEL key.
The CANCEL key can also be used to return to the higher screen but it must be used carefully
because it may cancel entries made so far.
To move between screens of the same hierarchical depth, first return to the higher screen and then
move to the lower screen.

4.2.3 Displaying Records

The sub-menu of "Record" is used to display fault records, event records, disturbance records and
counts such as trip count and ΣIy count.
4.2.3.1

Displaying Fault Records

To display fault records, do the following:
• Open the top "MAIN MENU" screen by pressing ENTER key.
• Select "Record" to display the "Record" sub-menu.
• Select "Fault" to display the "Fault" screen.
/ 4 S c h e m e
T r i p
> T r i p
O f f / O n
B I
O f f / O n
O C
O f f / O n
E F
O f f / O n
S E F
O f f / O n
N P S
O f f / O n
/ 1 R e c o r d
＞ F a u l t
E v e n t
D i s t u r b a n c
C o u n t e r
 87 
s w
_
1
1
1
1
1
1
E
6 F 2 T 0 1 7 2