Important Safety Instructions; General Safety; Intended Use; Appropriate Installation Location - Beko WMB 61221 PTM User Manual

1 Important safety instructions

This section contains safety instructions that will help protect
from risk of personal injury or property damage. Failure to
follow these instructions shall void any warranty.

General safety

• 8 years and older children and people with reduced
physical, sensory, and mental abilities as well as
unskilled or inexperienced persons can use this
appliance provided that they are supervised and
instructed on safe use of the appliance as well as to the
related dangers. Children should not play or tamper with
the appliance. Cleaning and user maintenance should
never be performed by children unless supervised by a
responsible adult.
• Never place the product on a carpet-covered floor;
otherwise, lack of airflow beneath the machine will
cause electrical parts to overheat. This will cause
problems with your product.
• Do not operate the product if the power cable / plug is
damaged. Call the Authorized Service Agent.
• Have a qualified electrician connect a 16-Ampere fuse
to the installation location of the product.
• If the product has a failure, it should not be operated
unless it is repaired by the Authorized Service Agent.
There is the risk of electric shock!
• This product is designed to resume operating in the
event of powering on after a power interruption. If you
wish to cancel the programme, see "Cancelling the
programme" section.
• Connect the product to a grounded outlet protected
by a fuse complying with the values in the "Technical
specifications" table. Do not neglect to have the
grounding installation made by a qualified electrician.
Our company shall not be liable for any damages that
will arise when the product is used without grounding in
accordance with the local regulations.
• The water supply and draining hoses must be securely
fastened and remain undamaged. Otherwise, there is
the risk of water leakage.
• Never open the loading door or remove the filter while
there is still water in the drum. Otherwise, risk of
flooding and injury from hot water will occur.
• Do not force open the locked loading door. The loading
door will be ready to open just a few minutes after the
washing cycle comes to an end. In case of forcing the
loading door to open, the door and the lock mechanism
may get damaged.
• Unplug the product when not in use.
• Never wash the product by spreading or pouring water
onto it! There is the risk of electric shock!
• Never touch the plug with wet hands! Never unplug by
pulling on the cable, always pull out by grabbing the
plug.
• Use detergents, softeners and supplements suitable for
automatic washing machines only.
• Follow the instructions on the textile tags and on the
detergent package.
• The product must be unplugged during installation,
maintenance, cleaning and repairing procedures.
• Always have the installation and repairing procedures
carried out by the Authorized Service Agent.
Manufacturer shall not be held liable for damages that
may arise from procedures carried out by unauthorized
persons.

Intended use

• This product has been designed for domestic use. It is
not suitable for commercial use and it must not be used
out of its intended use.
• The product must only be used for washing and rinsing
of laundry that are marked accordingly.
• The manufacturer waives any responsibility arisen from
incorrect usage or transportation.
Children's safety
• Electrical products are dangerous for the children. Keep
children away from the product when it is in use. Do not
let them to tamper with the product. Use child lock to
prevent children from intervening with the product.
• Do not forget to close the loading door when leaving the
room where the product is located.
• Store all detergents and additives in a safe place away
from the reach of the children.
2 Installation
Refer to the nearest Authorised Service Agent for installation
of the product. To make the product ready for use, review
the information in the user manual and make sure that the
electricity, tap water supply and water drainage systems are
appropriate before calling the Authorized Service Agent. If they
are not, call a qualified technician and plumber to have any
necessary arrangements carried out.
C
Preparation of the location and electrical, tap water and
waste water installations at the place of installation is
under customer's responsibility.
B
Installation and electrical connections of the product
must be carried out by the Authorized Service Agent.
Manufacturer shall not be held liable for damages that
may arise from procedures carried out by unauthorized
persons.
A
Prior to installation, visually check if the product has any
defects on it. If so, do not have it installed. Damaged
products cause risks for your safety.
C
Make sure that the water inlet and discharge hoses
as well as the power cable are not folded, pinched or
crushed while pushing the product into its place after
installation or cleaning procedures.

Appropriate installation location

• Place the machine on a rigid floor. Do not place it on a
long pile rug or similar surfaces.
• Total weight of the washing machine and the dryer -with
full load- when they are placed on top of each other
reaches to approx. 180 kilograms. Place the product
on a solid and flat floor that has sufficient load carrying
capacity!
• Do not place the product on the power cable.
• Do not install the product at places where temperature
may fall below 0ºC.
• Place the product at least 1 cm away from the edges of
other furniture.
3
EN