Auxiliary Function Selection; Starting The Programme - Beko WMB 61221 PTM User Manual

Auxiliary function selection

Use the following auxiliary functions according to your daily
needs. Select the desired auxiliary functions before starting
the programme. Furthermore, you may also select or cancel
auxiliary functions that are suitable to the running programme
without pressing the Start / Pause button when the machine
is operating. For this, the machine must be in a step before
the auxiliary function you are going to select or cancel.
If the auxiliary function cannot be selected or canceled, light
of the relevant auxiliary function will blink 3 times to warn the
user.
C
Some functions cannot be selected together. For
example, Prewash and Quick Wash.
C
If a second auxiliary function conflicting with the first
one is selected before starting the machine, the function
selected first will be canceled and the second auxiliary
function selection will remain active. For example, if you
want to select Quick Wash after you have selected the
Prewash, Prewash will be canceled and Quick Wash will
remain active.
C
An auxiliary function that is not compatible with the
programme cannot be selected. (See "Programme and
consumption table")
C
Auxiliary Function buttons may vary according to the
model of the machine.
• Prewash
A Prewash is only worthwhile for heavily soiled laundry. Not
using the Prewash will save energy, water, detergent and
time.
C
Prewash without detergent is recommended for tulle
and curtains.
• Quick Wash
This function can be used in Cottons and Synthetics
programmes. It decreases the washing times and also the
number of rinsing steps for lightly soiled laundry.
C
When you select this function, load your machine
with half of the maximum laundry specified in the
programme table.
• Rinse Plus
This function enables the machine to make another rinsing in
addition to the one already made after the main wash. Thus,
the risk for sensitive skins (babies, allergic skins, etc.) to be
effected by the minimal detergent remnants on the laundry
can be reduced.
• Anti-Creasing
This function creases the clothes lesser when they are being
washed. Drum movement is reduced and spinning speed is
limited to prevent creasing. In addition, washing is done with
a higher water level. Use this function for delicate laundry that
creases easily.
• Rinse Hold
If you are not going to unload your clothes immediately after
the programme completes, you may use rinse hold function
to keep your laundry in the final rinsing water in order to
prevent them from getting wrinkled when there is no water
in the machine. Press Start / Pause button after this process
if you want to drain the water without spinning your laundry.
Programme will resume and complete after draining the
water.
If you want to spin the laundry held in water, adjust the Spin
Speed and press Start / Pause button.
The programme resumes. Water is drained, laundry is spun
and the programme is completed.
• Soaking
The Soaking auxiliary function ensures better removal of
stains ingrained into the clothes by holding them in the
detergent water prior to startup of the programme.
• Pet hair removal
This function removes the pet hairs that remain on your
clothes more effectively.
When this function is selected, Prewash and Extra Rinse
steps are added to the normal programme. Thus, pet hairs
are removed more effectively by performing the washing with
more water (30%).
A
Never wash your pets in your washing machine.
Delayed Start (In some models only)
With the Delayed Start function the startup of the programme
may be delayed up to 3, 6 or 9 hours.
C
Do not use liquid detergents when you set Delayed
Start! There is the risk of staining of the clothes.
Open the loading door, place the laundry and put detergent,
etc. Select the washing programme, temperature, spin speed
and, if required, the auxiliary functions. Set the desired time
by pressing the Delayed Start button. When the button is
pressed once, 3 hours delayed start is selected. When the
same button is pressed again, 6 hours delay is selected, and
when it is pressed for the third time, 9 hours delayed start is
selected. If you press the Delayed Start button once again,
Delayed Start function will be canceled. Press Start / Pause
button. Previous delayed start time light turns off and next
delayed start time light turns on after every 3 hours. At the
end of the countdown, all delayed start lights will turn off and
the selected programme will start.
C
Additional laundry may be loaded during the delayed
start period.
Changing the Delayed Start period
Press Delayed Start button. Every time the button is pressed,
the period will change in 3-hour increments and the light of
the selected delayed start time will turn on.
Canceling the Delayed Start function
If you want to cancel the delayed start countdown and start
the programme immediately:
Set the Delayed Start period to zero (all delayed start period
lights will turn off) or turn the Programme Selection knob
to any programme. Thus, Delayed Start function will be
canceled. The End/Cancel light flashes continuously. Then,
select the programme you want to run again. Press Start /
Pause button to start the programme.

Starting the programme

Press Start / Pause button to start the programme.
Programme follow-up light showing the startup of the
programme will turn on.
C
If no programme is started or no key is pressed within
1 minute during programme selection process, the
machine will switch to Pause mode and the illumination
level of the temperature, speed and loading door
indicator lights will decrease. Other indicator lights and
indicators will turn off. Once the Programme Selection
knob is rotated or any button is pressed, indicator lights
12
EN