Volume Adjustment; Sound Mute On / Off; Off Timer - Panasonic TH-84EF1U Operating Instructions Manual

Volume Adjustment

Press <VOL +> <VOL -> or <+ (Unit)> <- (Unit)> to
adjust volume.
Unit
INPUT
Volume (SPEAKERS)
●
The current sound volume level is memorised even if
the power is turned off.
● When [Maximum VOL level] is set to [On], the volume
can only be adjusted to the maximum point you set,
and the displayed value turns red when it reached its
maximum. (see page 59)
●
When [Initial VOL level] is set to [On], the volume will
be at the set level when the display is turned on. (see
page 59)
30
English
-
+
MENU ENTER
20

Sound mute On / Off

It is useful when you want to mute the sound temporarily,
for example, when answering the phone or door.
Press <MUTE>.
●
appears on the screen and the sound is muted.
Press again to reactivate the sound.
●
It is also reactivated when the power is turned on / off
or the volume level is changed.
●
While MUTE is active,
after operation.
●
When the image set in [No signal image settings]
(see page 49) is displayed,
operation.
●
In [ENGLISH(US)] OSD language,
[MUTE].

OFF TIMER

The Display can be preset to switch to stand-by after a
fixed period. (30 min, 60 min, 90 min)
The setting switches each time <OFF TIMER> is
pressed.
●
[0 min] → [30 min] → [60 min] → [90 min]
→ [0 min] (Cancel)
●
When three minutes remain, the remaining time will
flash (Red). After that, it switches to stand-by.
●
To see the Off timer remaining time, press <OFF
TIMER>.
●
The Off timer is cancelled if a power interruption
occurs. When the power is turned on later on, it will
be in stand-by condition.
●
When the image set in [No signal image settings] (see
page 49) is displayed, remaining time is not displayed
even when the timer expires in 3 minutes. Instead,
the image is displayed until the power is turned off.
Press <OFF TIMER> to check the remaining time.
is displayed as a reminder
is not displayed after
is displayed as