Software Update - Sharp LC-46HD1E Operation Manual

Watching DVB broadcasts

Software update

TV base software and DVB software
To ensure that your TV set is always up to date, from
time to time SHARP will make updated TV base
software and DVB software versions available. These
updates are broadcast via satellite (only via ASTRA1).
• This function is not available in some countries.
Automatic search for new software via satellite
The set automatically determines whether a new
software version is available via satellite during the night
when the EPG data are updated. However the TV set
must remain in standby mode for this (do not switch off
the set with the power switch).
If a new software version has been found, the set
informs you with an on-screen message the next time
it is switched on (see right column – "Loading new
software").
Manual search for new software via satellite
If it is not automatically displayed that a new software is
available when switching on the set, you can also run a
manual search.
The system first checks whether a software update is
available via satellite.
1
Press MENU and the TV menu screen displays.
2
Press c/d to select "Setup", and then press b
to move down.
3
Press c/d to select "Miscellaneous", and then
press b to move down.
4
Press c/d to select "Software update", and
then press OK.
• The software versions currently loaded in the set are
listed.
Software update -> Software type
TV base software
DVB software
5
Press a/b to select the desired option, and
then press OK to start the search.
• If new versions are available then a subsequent
screen message will be displayed.
Downloaded From TV-Manual.com Manuals
Loading new software
The following will appear if a new software is found via
the search.
Software update -> Update options
Load new software now
Load new software after switch off to standby
Keep current software
6
Proceed to the next steps by following the
screen prompts.
• A bar is displayed to inform you of the progress of
the load process. During the loading process do not
switch off your device via the power switch! This may
last up to 20 minutes. You will be informed when it is
finished.
At the end of loading:
7
Turn off the TV set off with the power switch,
unplug the AC cord, and turn it on again.
• If a new software has not been updated via satellite,
you will be reminded of this several times after
switching on the set.
29