Updating Your Tv Via Usb; Software Update - Sharp Aquos LC-65XS1M Operation Manual

Basic adjustment

Updating your TV via USB

Setup

Software Update

This function allows you to update to the latest software using
a USB device.
You must update the software individually for both the Display
and AVC System through the USB terminal located on each.
CAUTION
• Do not remove the USB memory device or unplug the AC cord
while the software is being updated.
• Be sure to properly follow the whole procedure described below,
step by step. Otherwise, for example, the TV cannot read the data
in the USB memory device and software updating will fail.
1
Press MENU and the "MENU" screen displays.
2
Press c/d to select "Setup".
3
Press a/b to select "Software Update", and
then press ENTER.
Setup
Auto Installation
Programme Setup
Child Lock
Software Update
Identification
Reset
4
Press c/d to select the device you want to
update, and then press ENTER.
Choose which device you would like to update
AVC system
Use USB port on the AVC system side
Item
AVC system: Select "AVC system" when you want to
update the system for the AVC system.
Monitor: Select "Monitor" when you want to update the
system for the Display.
5
Press ENTER and then insert the USB device
containing the software update file.
CAUTION
• Be sure to insert the USB device correctly into the terminal of
device you select in step 4.
28
Option
Monitor
Use USB port on the monitor side
6
The TV displays a confirmation screen while
checking the data in the inserted USB device.
Now checking the data
in the USB memory device.
CAUTION
• If the data is not compatible with the system, an error
message appears on the screen. Repeat steps 5 and 6
after pressing ENTER.
• When an error message displays, check to see if:
• The USB device is inserted firmly.
• The USB device is inserted in the USB terminal of the device
you selected in step 4.
• The USB memory has two or more software update files.
• No data for updating the system exists in the USB memory.
• The software update file is broken.
• The software update file is not compatible with your TV's
software.
• The current system is same as the system update data.
7
The TV displays the software version information
after checking the data.
8
Press c/d to select "Yes" to update the
system, and then press ENTER.
Software update file is detected
in the USB memory device.
Start update?
Current Version
Update Version
Yes
9
Press ENTER to automatically reset and start
the update operation.
NOTE
• This operation may take a while.
The TV starts updating the system
A confirmation message appears on the
screen after completing the update and then
automatically restarts the TV. Press ENTER
to complete the operation.
Checking
: xxxxxxxxx
: xxxxxxxx
No