Supplied Accessories; Preparation; Attaching The Speaker Unit - Sharp LC-46HD1E Operation Manual

Supplied accessories

Remote control unit
(g1)
Pages 7 and 8
Speaker unit (g1)
Page 3
• Operation manual (This publication)

Preparation

Attaching the speaker unit

• Before attaching (or detaching) the speaker unit, unplug the AC cord from the AC INPUT terminal.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
1
Confirm that there are 4 screws and a
screwdriver supplied with the speaker unit.
2
Insert the projections on the speaker unit into
the corresponding slots on the TV, then fasten
the screws.
Insert and tighten the 4 screws with the
screwdriver in the order of 1, 2, 3 and 4.
3
Soft cushion
Downloaded From TV-Manual.com Manuals
AC cord (g1)
(For Europe, except
U.K. and Eire)
Page 5
Cable clamp
(Small g1, Large g1)
Page 5
Screwdriver
Screw
1 2 4
(For U.K. and Eire)
Stand hole cover (g2)
Page 4
• "AAA" size alkaline battery (g2)
3
Connect the ends of the cables to the speaker
terminals as shown.
Connect the leads to the speaker terminals of
the same colour.
NOTE
• To detach the speaker unit, perform the steps in reverse
order.
Cable tie (g1) Stand unit (g1)
Page 5
Cloth (g1) Screwdriver (g1)
Page 3
Red
Black
Red
Black
Page 4
3