ProForm Le Tour De France PFEVEX71316 User Manual page 9

6. Loosen the Seat Knob (29), and then pull it
downward.
Next, insert the Seat Carriage (4) into the Seat
Post (3), and release the Seat Knob (29) into
one of the adjustment holes in the Seat Carriage.
Make sure that the Seat Knob is in an adjust-
ment hole. Then, tighten the Seat Knob.
See the inset drawing. Tighten a #8 x 6mm
Screw (92) into the underside of the Seat
Carriage (4).
7. Have a second person hold the Handlebar Post
(6) near the Frame (2).
Locate the long wire tie (B) in the Handlebar
Post (6). Tie the lower end of the long wire tie to
the Main Wire (68).
Next, locate the middle of the long wire tie (B) in
the access hole (C) in the Handlebar Carriage
(105). In the indicated location (D), pull the long
wire tie upward until the end of the Main Wire
(68) is in the access hole.
See the inset drawing. Next, pull the free end
of the long wire tie until the Main Wire (68) is
routed through the Handlebar Carriage (105) as
shown. Then, untie and discard the long wire tie;
do not remove the short wire tie.
6
3
29
7
Avoid
pinching
the Main
Wire (68)
6
B
68
2
9
4
4
92
D
105
B
C
68
105
B