Functions Of L Eds A And B; Adapter Insert (Ibox 01); Bluetooth; Bluetooth Usb Adapter - Bosch KTS 530 Operator Instructions Manual

en 18 | KTS 530 / KTS 540 / KTS 570 | Description of unit
2.5.3

Functions of L EDs A and B

L ED A Function
Does not il- No data communica-
luminate tion with the controller
Flashes green Data communication
(irregular) with the controller
Illuminated green Fault in hardware/
Firmware
Illuminated red Power supply > 35 Volt. Check vol-
L ED B Function
Does not il- Voltage not present
luminate
Flashes green KTS ready for
(1 second in- operation
terval)
Illuminated green Fault in hardware/
Firmware
Flashes yellow Overvoltage on
(1 second in- diagnostic cable
terval)
Illuminated yellow Fault in hardware/
Firmware
Flashes red Firmware update
(irregular) in operation
Illuminated red Fault in firmware-
update
(*) Unplug the USB connection and power supply and connect them
again. If the error still ex ists, contact custom er service.
2.5.4

Adapter insert (IBOX 01)

The adapter insert (Fig. 3, Item 8) contains all of the
existing capabilities for establishing communication
with the vehicle diagnosis interfaces that are known. In
order to flexibly adapt to future expansions in diagnosis
protocols, the adapter insert can be changed quickly
without any tools.
KTS modules only function with the adapter insert
connected.
1 689 979 987 | 2006-09-29
2.6
Measures
2.6.1
Check connection
The Bluetooth USB adapter, which is included with delivery,
with the controller
allows wireless connection with KTS 540 and KTS 570. It is
None
connected to the PC/Laptop and shows that it is ready for
(*) operation when the red LED is illuminated.
Do not put any mechanical stress on the Bluetooth
tage in vehicle
USB adapter and do not use it for gripping. This can
damage the laptop or Bluetooth USB adapter.
Measures
Check pow-
er supply 2.6.2
None
Bluetooth Manager symbol
control unit diagnosis function is active::
(*)
(*)
Color
Green
(*)
White
None
White/
Repeat firm-
green in 7-
ware update
sec. cycle.
Red
Bosch Bluetooth Device symbol
the control unit diagnosis function is active::
Color
Green
Red
Symbol
not there.
Interrupting the Bluetooth connection with the
KTS 540 and KTS 570 can activate an acoustic alarm
signal in the PC/Laptop (see Online Help DDC). If a
fault occurs, the USB connection can be activated
and used instead of the Bluetooth connection.

Bluetooth

Bluetooth USB adapter

Information regarding Bluetooth symbols

(in toolbar) when the
Function
Bluetooth USB adapter active and
communicating with KTS 540 or KTS 570.
Bluetooth USB adapter plugged into PC/
laptop, but Bluetooth connection inactive.
Bluetooth USB adapter tries to create a wire-
less connection to the KTS module.
Bluetooth USB adapter not plugged into PC/laptop.
Function
Field strength of Bluetooth wireless link OK.
Field strength of Bluetooth wireless link too low.
Reduce distance between Bluetooth USB adapter
and the KTS module or avoid obstacles such
as e. g. steel doors or concrete walls.
No Bluetooth wireless connection.
Follow the instructions in chapter 2.8.
(in toolbar) when
Bosch Diagnostics
http://www.obd2be.com/