Table of Contents
Advertisement
RUGGEDCOM RS930W
Installation Guide
Introduction
The RUGGEDCOM RS930W is an industrially hardened Ethernet switch which integrates an IEEE 802.11b/g
Wireless Access Point, with a fully managed wired six-port Ethernet switch providing six Fast Ethernet copper
only ports and one Ethernet over VDSL (EoVDSL) interface. With the installation of the RS930W wireless access
point, a network designer will achieve the integration of wired and wireless networks. The RS930W can be
configured as an access, client or bridge device. In addition, the EoVDSL can be used to connect a remote
location back to the central control room using existing telephone grade cable (or other legacy serial cabling) at
distances of up to 5 km (3 mi).
Designed to operate reliably in harsh industrial environments the RS930W provides a high level of immunity
to electromagnetic interference and heavy electrical surges typical of environments found in electric utility
substations, factory floors or in curb-side traffic control cabinets. An operating temperature range of -40 to 85 °C
(-40 to 185 °F) coupled with hazardous location certification, optional conformal coating and a galvanized steel
enclosure allows the RS930W to be placed in almost any location.
The RS930W functions as a standalone IEEE 802.11b/g access point for wireless clients providing wireless data
rates of up to 54 Mbps. All wireless communications are protected by the very latest robust security networks
features including strong encryption protocols using WPA with TKIP and even WPA2/802.11i with AES support.
Static authentication support is provided by WPA-PSK. For additional centralized control, the RS930W also
supports IEEE 802.1X/RADIUS for wireless user traffic and distributing dynamic encryption keys.
The following sections provide more information about the RS930W:
•
Section 1.1, "Feature Highlights"
•
Section 1.2, "Ports, Controls and Indicator LEDs"
Section 1.1
Feature Highlights
Ethernet Ports
• One Ethernet over VDSL (EoVDSL) interface
• Six fast Ethernet ports (10/100Base-TX)
Cyber Security
• WPA (Wi-Fi Protected Access) with TKIP for enhanced security and encryption
• WPA2/802.11i with CCMP for robust security and 128-bit AES encryption
• IEEE 802.1X/RADIUS using EAP-PEAP for secure enterprise class authentication configuration
• Pre-shared Key Mode (PSK) for personal mode authentication configuration
• Multi-level user passwords
• SSH/SSL (128-bit encryption)
• Enable/disable ports, MAC based port security
• Port based network access control (802.1x)
• VLAN (802.1Q) to segregate and secure network traffic
Feature Highlights
Chapter 1
Introduction
1
Advertisement
Table of Contents
