Dimensional Drawing With Accessoires - Daikin FCQH71D8VEB Technical Data Manual

5 Dimensional drawing & centre of gravity

5 - 3 Dimensional drawing with accessoires

FCQH71D8
Installation service access panel
Pipe connection side
Drain connection side
View A
NOTES
1 When installing this kit, inspection hatch is necessary.
(It is necessary when servicing.) Either one of
inspection hatches must be installed.
2 Field construction.
3 The corner air outlet of this part must be shut.
4 In case of mounting a duct fan, make sure to use a wiring adapter for
electrical appendices and link with the indoor unit fan.
FCQH100,125,140D8
Installation service access panel
Pipe connection side
Drain connection side
View A
NOTES
1 When installing this kit, inspection hatch is necessary.
(It is necessary when servicing.) Either one of
inspection hatches must be installed.
2 Field construction.
3 The corner air outlet of this part must be shut.
4 In case of mounting a duct fan, make sure to use a wiring adapter for
electrical appendices and link with the indoor unit fan.
• Indoor Units • Cooling Only/Heat Pump • FCQH-D8VEB
Service acces panel:
450 x 450 mm or more
(Refer to note 1)
Service acces panel:
450 x 450 mm or more
(Refer to note 1)
note 3
note 3
455 (Ceiling opening panel)
Connecting chamber mounting space
A
5 The intake air flow rate is recommended to be 20%
or less of the H speed air flow rate.
If the intake air flow rate is too large, the operating
sound may rise or detection of the indoor unit suction temperature may be affected.
6 It indicates the distance between the T-tube inlet and the
indoor unit inlet when the T-tube is connected.
Service acces panel:
450 x 450 mm or more
(Refer to note 1)
Service acces panel:
450 x 450 mm or more
(Refer to note 1)
note 3
note 3
455 (Ceiling opening panel)
Connecting chamber mounting space
A
5 The intake air flow rate is recommended to be 20%
or less of the H speed air flow rate.
If the intake air flow rate is too large, the operating
sound may rise or detection of the indoor unit suction temperature may be affected.
6 It indicates the distance between the T-tube inlet and the
indoor unit inlet when the T-tube is connected.
• Split Sky Air • Indoor Units
Ventilation resistance in chamber (note 6)
Nr Name
1 Indoor unit
2 Decoration panel
3 Suction chamber
4 Connecting chamber (Right)
5 Connecting chamber (Left)
3
Air flow rate (m /min)
(*) In case a discharge opening is closed with the 'sealing member' option, the distance of 1500 mm can be reduced to 500 mm on the closed side.
Ventilation resistance in chamber (note 6)
Nr Name
1 Indoor unit
2 Decoration panel
3 Suction chamber
4 Connecting chamber (Right)
5 Connecting chamber (Left)
3
Air flow rate (m /min)
(*) In case a discharge opening is closed with the 'sealing member' option, the distance of 1500 mm can be reduced to 500 mm on the closed side.
Description
Inlet
T-tube
Field supply
3D057034
Description
Inlet
T-tube
Field supply
3D057032
8