Use; Intended Use; Attaching/Removing The Hose; Adjusting The Parquet/Carpet Brush - Beko BKS 1330 C User Manual

3

Use

3.1 Intended use

The appliance was designed to be used in houses,
and is not fit for industrial use.
3.2 Attaching/removing the
hose
1. To attach the hose (1) pull the hose cap (4) in
the direction of arrow until it is aligned with the
housing.
• The tabs on the hose cap (4) must be seated
correctly.
2. To remove the hose (1) press on the tabs on the
hose cap (4) and pull it.
3.3 Adjusting the parquet/
carpet brush
By pressing the adjustment latch located on the
parquet carpet brush (8);
• Use " " position for hard surfaces and
parquet.
• Use " " for carpets.
Vacuum Cleaner / User Manual

3.4 Accessories

Crevice tool
Suitable for the cleaning of the
surfaces which are difficult to clean,
such as the areas remaining under
the sofas and furniture.
A
WARNING: Do not make cleaning
by using the handle' s (12) end part.

3.5 Operation

1. Plug the appliance after pulling the power plug
located at the back of the appliance.
2. Press on/off button to switch on your applian-
ce.
3.5.1 Adjusting the suction
power
You can lower the suction power of the parquet
carpet brush by pulling backward the vacuum
adjustment control located on the handle (12).
7 / 20 EN