Troubleshooting - HOUNO Visual Cooking C User Manual

TROUBLESHOOTING

TROUBLESHOOTING
If you experience issues with your oven, try the following solutions.
Error Code Problem
3 Generator too hot
4 Oven too hot
5 fan too hot
6 Drain too hot
7 Oven sensor defective
8 Core temperature probe
not connected
9 Generator sensor
defective
10 Drain sensor defective
11 Water shortage
26 STANDARD USER MANUAL
Possible solution
The generator thermo switch has tripped.
press the button under the oven to
reconnect.
The oven chamber thermo switch has
tripped. press the button under the oven
to reconnect.
The thermo switch in the motor has
tripped. Wait for 10 minutes and then
retry.
The drain temperature has been above
75°C for more than 5 minutes. Check
that the water is turned on. Check that
the jet in the drain is working properly.
The temperature sensor in the oven is
not working. Contact authorized service
personnel.
you have selected a program that uses
the core temperature probe, but the
probe has to be connected.
The temperature sensor in the generator
is not working properly. Contact
authorized service personnel.
The sensor in the drain is now working
properly. you can still use the oven.
The steam generator was not filled with
water within 2 minutes. Check that the
water is turned on. Contact authorized
service personnel.