Connecting A Handset Or Headset; Handset; Headset (Optional) - Mitel 6869i Installation Manual

CONNECTING A HANDSET OR HEADSET

HANDSET

Turn the phone over and locate the handset jack marked j. Insert one end of handset cord
into the jack until it clicks into place. Then route the handset cord through the groove as shown
in the illustration below. Attach the handset to the other end of the handset cord.

HEADSET (OPTIONAL)

Turn the phone over and locate the headset jack marked
RJ9/RJ22 4-pin connector, insert the headset cord into the jack until it clicks into place. Then
route the headset cord through the groove as shown in the above illustration.
If you have a DHSG/EHS headset with an RJ45 6-pin or 8-pin connector, remove the plastic
headset jack adapter and then insert the cord into the jack until it clicks into place.
WARNING: THE HEADSET PORT IS FOR HEADSET USE ONLY. PLUGGING ANY
OTHER DEVICES INTO THIS PORT MAY CAUSE DAMAGE TO THE PHONE AND
WILL VOID YOUR WARRANTY.
f
Pull to remove headset jack adapter
Installation and Setup
To Handset
. If you have a headset with an
10