Mitel 6869i Quick Reference Manual

Basic Call Handling

Placing a Call
Lift the handset, press a Line key, or press the
1.
key.
Dial the number from the keypad and press the
2.
Dial softkey.
Ending a Call
Place the handset on its cradle or press the
Answering a Call
Lift the handset for handset operation or press the Line key or
operation.
Ignoring a Call
key or Ignore softkey when the phone is ringing to ignore the
Press the
incoming call and (if configured) send the incoming call directly to voicemail.
Redialing
key once to access a list of recently dialed numbers. Use the Up and
Press the
Down navigation keys to scroll through the entries and the Select key (or Dial softkey)
to redial the selected number. Press the
Muting
Press the key to mute the handset, headset, or speakerphone.
Holding and Resuming
To place a call on hold, press the
1.
To resume the call, press the
2.
the line where the call is being held.
Please note, the following features are not currently being offered:
Picture ID, Call Recording, & TLS/SRTP Encryption.
key.
key for handsfree
key twice to call the last dialed number.
key when connected to the call.
key again or press the Line key corresponding to
41-001555-00 REV02
Mitel Model 6869i IP Phone
Quick Reference Guide
Mitel Model 6869i IP Phone Quick Reference Guide

Getting Started

Presence:
See Other Features for
more details.
Goodbye
Hold
Options:
Accesses services and
options to customize
your phone.
Mute
Volume
Navigation/Select:
Multi-directional naviga-
tion keys that allow you
to navigate through the
phone's user interface.
See UI Navigation for
more details.
503.266.8111 • www.directlink.coop
For more information please refer to the 6869i IP Phone User Guide.
Top Softkeys:
12 programmable keys that support
up to 44 functions.
Bottom
Softkeys:
5 programma-
ble/state-based
softkeys that
support up to 24
functions.
Callers:
Accesses a list of
received/missed
incoming calls.
Redial
Line/Call
Appearance:
Line presentation
for incoming and
outgoing calls.
Speaker/Headset:
Toggles the phone's audio between speaker
and headset. If you are using a DHSG/EHS
headset, ensure that the headset jack adaptor
is removed from the headset port (indicated
by the fsymbol). Refer to the 6869i Installation
Guide for more details.
Warning!
The headset port is for headset use only.
Plugging any other devices into this port
may cause damage to the phone and will
void your warranty.