To Preset Channels (Manual Search); Mft (Manual Fine Tuning) - Palsonic 6830G Owner's Manual

OPERATION
Tuning in (continued)
Use the MANUAL SEARCH function if desired channels can not be preset with the
AUTO SEARCH or if you would like to preset channels to specific position numbers one by one.
It is convenient to set the channel numbers to the same position numbers using MANUAL
SEARCH and SKIP functions.

To preset channels (Manual search)

Manual search
If AUTO SEARCH can not preset the desired channels, or you want to preset the desired channels one
by one with the preferred channel numbers, please make use of Manual search.
1.
Note: press the
within 0.7 seconds. Press and hold the
for over 0.7 seconds to select a decimal number
2.
Press the button to search channels from current channel to
lower channel (the screen displays glittering ("
channel is located, the searching stops, this channel is then
memorised with the preset position number.
Note:
you can also make use of BAND selection to quicken the
searching process in your desired band. Press the
button moves the band to the next step in the sequence below.
3. When you want to store another channel at another position, repeat steps 1 & 2 above.
Press the MENU button repeatedly to enter into the
(PRESET) menu, or press the
button to select POSITION. Press the
or button to select a desired position
number (from 0~255)
or button to select a channel number
Press the or button to select SEARCH.
Press the button to search channels from
current channel to higher channel (the screen
displays glittering (" ").
VHFL VHFH
or
or button
"). When a
or
UHF
9
008
POSITION
BAND VHFL
SKIP OFF
SEARCH
MFT
AUTO MEMORY
lllllllllllll
lllllllllllllllllllllllllllllllll
POSITION 008
BAND VHFL
OFF
SKIP
SEARCH
MFT
AUTO MEMORY
lllllllllllll
lllllllllllllllllllllllllllllllll
POSITION 008
BAND VHFL
SKIP OFF
SEARCH
MFT
AUTO MEMORY
lllllllllllll
lllllllllllllllllllllllllllllllll