Presetting Programs; Auto Search; Manual Search - Palsonic 6125TS Owner's Manual

61cm cordless remote colour television

Hide thumbs

Table Of Contents

Table of Contents

Firstly, use the Auto search function to preset all active channels in your area automatically.

Then arrange the preset channels with the manual search and program edit functions.

Auto Search

Press the MENU button to select PRESET menu.

Press CH+/- to select AUTO SEARCH.

Press VOL+/- and the TV set starts Auto channel preset. All

active channels will be preset and stored into the memory

automatically. After presetting, the TV will display the first channel.

During the process of Auto channel preset, pressing the MENU

button will stop the process.

Note: Before you start Auto Search, we recommend you to

set a proper Sound system and Colour system according to

your local area.

Manual Search

If desired channel can not be preset by Auto search or if you

would like to preset channels to specific position numbers one

by one, use manual search function.

Access the PRESET menu, then select PROGRAM item by

CH+/- and set the desired channel number (from 0~199) by

VOL+/- or Digit buttons.

Press CH+/- to select MANUAL SEARCH item. Press VOL+

button, the set searches towards higher frequency. Press

VOL- button, the set searches towards lower frequency.

The search stops when a program is found and this program

will be stored in the specified position number.

You can use band selection to quicken search process. Select

BAND item and press VOL+/- buttons. The band switches

among V-L, V-H and UHF. Then select MANUAL SEARCH

item and press VOL+/- buttons to start manual search.

Repeat the above steps if you want to store another program

in other position number.