Congratulations on your purchase of this Palsonic colour television receiver. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver. Retain is manual in an easily accessible location for future reference.
NOTES FOR OPERATION * Do not let the TV set be in standby condition for a long period of time. When it is not in use, please turn off the power supply and remove the power plug. When it is to be left for a prolonged period of time, it is recommended to disconnect the connection to the outdoor aerial, to avoid thunder strike.
Installation and appearance Antenna connection To ensure a bright - coloured and clear picture, you should use an outdoor aerial or CATV cable. If the signals are strong enough, you may use an indoor aerial. Note: When you connect the outdoor aerial cable to the aerial terminal on the TV set, please turn off the power switch on the TV while connecting the antenna lead.
Appearance Front view INDICATOR INDICATOR REMOTE SENSOR MENU TV/AV Back view AV1 IN (VIDEO, AUDIO L/MONO R) S-VHS IN POWER SWITCH (UP) VOL+ (UP) (DOWN) VOL- (DOWN) ANTENNA INPUT AV OUT (VIDEO, AUDIO L/MONO R) AV2 IN (VIDEO, AUDIO L/MONO R)
Standby Channel direct select Sleep timer Picture mode selection *Sound system select * NOTE: this TV model's RF sound system is BG only. Therefore the SYS1/2 button on the remote controller is ineffective in sound system selection. Similarly in the Preset and Function menus the SYS item (sound system selection item) is ineffective.
Operation Turning the power on/off 1. Connect the power, push the main power switch, the red indicator is on, the set is in standby mode. 2. Push the button on the remote controller to turn on the set when the set is in standby, this time, the green indicator is on, on the upper right corner of the screen will display channel number, colour and sound system.
1. PICTURE menu Making use of the PICTURE menu can adjust the picture effect according to your personal preference and it will be stored as picture memory mode automatically. Press the CH button to select the item (the selected item is highlighted in red). Press the button to adjust it.
Page 10
Making use of the PRESET menu can fulfil the function of auto-search, search. manual search , channel and band selection. AFT and skip on/off. Press CH button to select the item. (the selected item is highlighted in red). Press the MENU button to exit to the main menu.
6) Auto - search (AUTO) Press CH button to highlight AUTO. Press VOL search and store the active TV signals in your local area from lower band to higher band in the sequence of VL VH U with the green bar moving rightward. When a station is located, the set will store the signals with a channel number from 0.
Press CH button to select item (the selected item is highlighted). Press MENU button to exit to the main menu. 1) STD (colour system) selection. In this TV model the colour system is automatically identified. In normal circumstances, please set colour system to AUTO. 2) SYS (sound system) selection.
Picture and volume adjustment 1. Picture adjustment Press PIC button repeatedly, on-screen display will change in the sequence below BRIGHTNESS BRIGHTNESS NTSC Press VOL button to adjust the level. For example, to adjust brightness: Press " Press "PIC" BRIGHTNESS llll... Press "...
Picture mode selection You can select the picture quality instantly among three presets modes and one user-set mode. Press the button to select the desired picture quality. DYNAMIC, STANDARD, MILD and MEMORY (user-set) can be selected cyclically. MEMORY DYNAMIC Item Output Brightness Mode...
Page 15
COLOR SYSTEM PAL(RF/VIDEO) AUTO NTSC 3.58 (VIDEO) PAL(RF/VIDEO) PAL-60(RF/VIDEO) NTSC3.58 (VIDEO) N358 N443 NTSC4.43(VIDEO) 3. SLEEP timer Using the SLEEP button allows you to have the appliance automatically turned off after a preset time (the time range will be as long as 120 minutes) , and set the appliance to standby mode. At every press of the button the setting time will be decreased by 30 minutes.
Page 16
AUTO Press AV Press AV Note: S-VHS IN and AV2 use the same interface. If you want to receive signals input through S-VHS terminal, switch the set to AV2, the S-VHS (S-VIDEO) input terminal has priority over the AV2 VIDEO terminal; To use equipment connected to the AV2 VIDEO IN terminal, disconnect any plug from the S-VHS terminal.
External equipment connection This set is incorporated with Audio & Video input and output terminals which allows direct connection to external equipments (such as VCR, Video DISC, VCD, Satellite Receiver etc.) for playing back and recording the programs. 1. Video playback If your video equipment has a S-VHS output terminal, connect it to the S-VHS input terminal (special S-VIDEO type) of the set and connect audio line to AV2 AUDIO IN terminal.
Page 18
2. Recording 2.1 According to the following figure connect the TV set to the VCR. (Y) YELLOW (VIDEO) (W) WHITE (AUDIO, L/MONO) (R) (AUDIO, R) 2.2 When recording, set the TV on the desired channel, the program recorded is the program displayed on the screen.
Troubleshooting Symptoms The set cannot be turned on, red indicator is off Poor colour, poor tint Spots appear on the screen Stripes appear on the screen Double images or "ghosts" Snowy picture Colour or sound is abnormal The remote controller does not work TV cabinet creaks Check the following items...