The Connection/Power Menu - Sony VPL-SW636C Operating Instructions Manual

The Connection/Power Menu

The Connection/Power menu is used for setting for the connections and power.
Items
LAN Settings
IP Address
*9
Setup
*10
WLAN Settings
WLAN
Connection
WLAN
*14
Network
Network Presentation
Connection
CODE
Display Setting
*18
Dynamic Range
Input-A Signal Sel.
30
The Connection/Power Menu
Item descriptions
Auto (DHCP): The IP address is assigned automatically from the
DHCP server such as a router.
Manual: To specify the IP Address manually.
On/Off: Set the wireless output of the USB wireless LAN module (not
*8
supplied) to On/Off.
Access Pt./Client
On/Off: This is the presentation function via the network. It controls
the connection using the displayed number (CODE) on the right bottom
of the screen. During the image transmission, using the ENTER key on
the remote commander makes Connection CODE display again.
LAN Mode Displays the LAN settings of the projector or the settings
of the USB wireless LAN module that operates as a client
at the bottom right of the screen.
Wired: Displays the IP address of LAN preferentially.
Wireless: Displays the IP address of the USB wireless
LAN module preferentially.
AP Mode Displays the SSID of the USB wireless LAN module that
operates as an access point at the bottom right of the
screen.
Sets the image input level of the INPUT C terminal.
Auto: Distinguishes the image input level automatically.
Limited: Set when the image input level is 16-235.
Full: Set when the image input level is 0-255.
Auto/Computer/Video GBR/Component: When set to "Auto," selects
the type of video signal input automatically when "Input-A" is selected.
*11
: Changes modes for WLAN.
*12
*1