Using The Mouse Mode Function (Vpl-Sw636C Only); Setting The Mouse Mode; Operations Of Interactive Pen Device While Using Mouse Mode - Sony VPL-SW636C Operating Instructions Manual

Hide thumbs Also See for VPL-SW636C:

Quick reference manual (271 pages)

Table Of Contents

100

101

102

103

104

105

106

Table of Contents

Using the Mouse Mode Function

(VPL-SW636C only)

You can directly operate the Interactive Pen Device as a mouse on the screen by connecting the

projector and computer with a USB cable. You can directly operate the applications, etc. on the

computer screen.

Note

This is for the main pen only.

System Requirements

• OS: Windows 7/Windows 8/Windows 8.1

Setting the Mouse Mode

Connect the projector and computer with the AV cable and USB cable (page 47), and

project the image with the projector.

For details on connecting the AV cable (Mini D-sub 15-pin cable or HDMI cable) for image

signals (VGA), see page 9.

Set "Interactive Mode" to "PC Interactive" in "Interactive" (page 27).

Perform the calibration.

Select "Auto" or "Manual (Main)" in "Calibration" of "Interactive" (page 27), or the

calibration icon on the toolbar of the PC Free Interactive function (page 53) to perform

calibration.

Note

For notes regarding usage of the Interactive Pen Device and performing calibration, see

page 53.

Operations of Interactive Pen Device While Using Mouse Mode

Corresponding mouse operations

Left-click

Double-click

Drag and drop

Right-click

Notes

• If the projected image includes a large amount of black portions around it, the image will not

be displayed properly, and the positions of pen tip and the computer cursor may not match.

In this case, adjust "Pitch" and "Shift" manually (page 24).

• If the resolution of the image signal of the computer and the "Signal Type" (page 34) on the

Information menu do not match, the positions of the pen tip and computer cursor may not

match.

• The maximum screen size at which the Interactive function works is 100 inches.