Setting The Custom Labels For The Input Terminals Of The Projector; Setting The Control Protocol Of The Projector - Sony VPL-SW636C Operating Instructions Manual

-Subnet Mask: Input the subnet mask of
the projector.
-Default Gateway: Input the default
gateway of the projector.
-Primary DNS: Input the primary DNS
server of the projector.
-Secondary DNS: Input the secondary
DNS server of the projector.
MAC Address: Displays the MAC
address for USB wireless LAN
module.
Setting the Custom Labels for
the Input Terminals of the
Projector
Change the label names for the input
terminals that will be displayed on the
projected screen on the Setup page. The
entered label names will not be applied
unless you click on [Apply].
1
Click on [Advanced Menu] to open
the Setup page.
Advanced Menu button
2
Click on [Input Label] and open the
Input label setting window.
Clear the check box for the label that
you want to change and input the label
name. You can input up to 20 of the
following letters.
Alphabets: "a" to "z", "A" to "Z"
Numbers: "0" to "9"
42
Using Network Features
Characters: ".", ", ", ":", ";", "!", "?", "'",
""", "#", "$", "%", "&", "@", "(", ")",
"<", ">", "[", "]", "{", "}", "|", "=", "*",
"+", "-", "/", "_", "\", "^", "`", "~", space
Input Label button
Label name for the
input terminal
3
Click on [Apply] to apply the set
label names.
The label name will be reflected on the
screen when the input of the projector is
changed.
Input Terminal Label Display Screen
Setting the Control Protocol
of the Projector
Change the settings for the control protocol
on the Setup page. Entered values will not be
applied unless you click on [Apply].
Use the
factory
default
setting