Outdoor Unit; Tubing Connections - Airwell CADE024 Service Manual

INTRODUCTION
1.6

Outdoor Unit

The outdoor units can be installed as floor or wall mounted units by using a wall
supporting bracket. The metal sheets are protected by anti- corrosion paint work
allowing long life resistance. All outdoor units are pre-charged. For further information
please refer to the Product Data Sheet, Chapter 2.
It includes :

Compressor mounted in a soundproofed compartment :

Axial fan.

Outdoor coil with hydrophilic louver fins for RC units.

Outlet air fan grill.

Service valves" flare" type connection.
1.7

Tubing Connections

Flare type interconnecting tubing to be produced on site.
For further details please refer to the Installation Manual, Chapter 10.
1.8 Accessories
RCWE Wall Mounted Remote Control
The RCWE remote control is mounted on the wall, and controls the unit either as an
infrared remote control or as a wired controller. The wired controller can control up to
10 indoor units with the same program settings and adjustment.
For further details please refer to the Technical Service Manual.
1.9 Inbox Documentation
Each unit is supplied with its own installation and operation manuals.
SM YUDE 2-A.1 GB 1-3