Yamaha AVENTAGE RX-A1060 Owner's Manual page 110

Menu
Network Connection
IP Address
Network Network Standby
MAC Address Filter
Network Name
Bluetooth
Disconnect
Audio Receive
Bluetooth Bluetooth Standby
Transmitter
Audio Send
Device Search
Main Zone Set Zone Rename
Volume
Max Volume
Initial Volume
Audio Delay
Zone2 Set Mono
Multi Zone Enhancer
Tone Control
Extra Bass
Zone Rename
Monitor Out Assign
HDMI OUT2 Assign
Party Mode Set
Input Assignment
Dimmer (Front Display)
Display Set Short Message
Function Wallpaper
Trigger Mode
Trigger Output1
Trigger Output2
Target Zone
Memory Guard
Item
Selects the network connection method.
Configures the network parameters (such as IP address).
Selects whether to enable/disable the function that turns on the unit from other network devices.
Sets the MAC address filter to limit access to the unit from other network devices.
Edits the network name (the unit's name on the network) displayed on other network devices.
Enables/disables the Bluetooth functions.
Terminates the Bluetooth connection between the Bluetooth device (such as smartphones) and the unit.
Selects whether to enable/disable the function that turns on the unit from Bluetooth devices (Bluetooth standby).
Enables/disables the Bluetooth audio transmitter function.
Searches available Bluetooth devices (speakers/headphones) when the unit is used as a Bluetooth audio transmitter.
Changes the zone name (for main zone) displayed on the front display or TV screen.
Enables/disables volume adjustments for Zone2 output.
Sets the Zone2 limit value of the volumes.
Sets the Zone2 initial volume for when the unit is turned on.
Adjusts the Zone2 audio output timing.
Switches between stereo and monaural for Zone2 output.
Enables/disables Compressed Music Enhancer for Zone2 output.
Adjusts the level of high-frequency range and low-frequency range for Zone2 output.
Enables/disables Extra Bass for Zone2 output.
Changes the zone name (for Zone2) displayed on the front display or TV screen.
Select the zone for which the MONITOR OUT/ZONE OUT jacks are used.
Select the zone for which the HDMI OUT 2 (ZONE OUT) jack is used.
Enables/disables switching to the party mode.
Assigns the COMPONENT VIDEO, COAXIAL and OPTICAL jacks to another input source.
Adjusts the brightness of the front display.
Selects whether to display short messages on the TV screen when the unit is operated.
Selects the image to be used as wallpaper on the TV.
Specifies the condition for the TRIGGER OUT jack to function.
Specifies the zone with which the TRIGGER OUT jack functions are synchronized.
Prevents accidental changes to the settings.
Function
110
En
Page
120
120
121
121
122
122
70
122
123
71
123
124
124
124
124
124
124
124
125
125
125
125
125
126
126
126
126
127
127
127