Connecting To The Jacks On The Front Panel - Yamaha AVENTAGE RX-A1060 Owner's Manual

Connecting to the jacks on the front panel

Use the VIDEO AUX jack to temporarily connect a playback device to the unit.
Use the USB jack to connect a USB storage device. For details, see "Connecting a USB storage
device" (p.72).
Before making a connection, stop playback on the device and turn down the volume on the
unit.
⬛
HDMI connection
Connect an HDMI-compatible device (such as game consoles and camcorders) to the unit with
an HDMI cable.
ENTER
ZONE 2
RETURN DISPLAY
PHONES
USB
VIDEO
5V 1A YPAO MIC SILENT CINEMA
The unit (front)
Game console
Camcorder
If you select "V-AUX" as the input source by pressing V-AUX on the remote control, the
video/audio played back on the device will be output from the unit.
Y
• To watch videos input to the VIDEO AUX (HDMI IN) jack, you need to connect your TV to the HDMI OUT jack of
the unit (p.29).
• You need to prepare an HDMI cable that matches the output jacks on your device.
• The VIDEO AUX (HDMI IN) jack does not support HDCP 2.2.
ZONE CONTROL
VIDEO AUX
L AUDIO R
HDMI IN
HDMI
⬛
Composite video/analog stereo connection
Connect a playback device (such as game consoles and camcorders) to the unit with a video
pin cable and a stereo pin cable.
ENTER
RETURN DISPLAY
USB
5V 1A
The unit (front)
Game console
Camcorder
If you select "V-AUX" as the input source by pressing V-AUX, the video/audio played back on the
device will be output from the unit.
X
If you connect video devices to both the VIDEO AUX (HDMI IN) jack and VIDEO AUX (VIDEO/AUDIO) jacks, the unit
outputs video/audio input through the VIDEO AUX (HDMI IN) jack.
34
En
ZONE 2 ZONE CONTROL
PHONES VIDEO AUX
YPAO MIC SILENT CINEMA VIDEO L AUDIO R HDMI IN
V L R