Multi Zone; Zone2 Out; Zone2 Set - Yamaha RX-V671 Owner's Manual

Multi Zone

Configures the multi zone settings.
■

Zone2 Set

Configures the audio output settings for Zone2.
• The "Zone2 Set" settings are available only when "Power Amp Assign" (p.88) is set to "7ch+1ZONE"
❑ Max Volume
Sets the Zone2 maximum volume so that sound is not too loud.
Setting range
-30.0dB ~ +15.0dB (5.0dB steps), +16.5dB
Default
+16.5dB
❑ Initial Volume
Sets the Zone2 initial volume for when this unit is turned on.
Settings
Off (default) Sets at the level when this unit last entered standby mode.
Sets at Mute, or -80.0dB ~ +16.5dB (0.5dB steps).
On
(This setting works only when "Max Volume" is set higher.)
■
Zone Rename
Changes the zone names displayed on the TV screen.
■
Setup procedure
1
Use the cursor keys to select a zone to be renamed and press ENTER.
2
Press ENTER, use the cursor keys to rename, and then press ENTER again.
3
Use the cursor keys to select "OK" and press ENTER.
• To clear the entry, select "CLEAR".
4
To exit from the menu, press ON SCREEN.
95
En