Connecting An External Power Amplifier - Yamaha AVENTAGE RX-A1060 Owner's Manual

⬛

Connecting an external power amplifier

When connecting an external power amplifier to enhance speaker output, connect the input
jacks of the power amplifier to the PRE OUT jacks of the unit. The same channel signals are
output from the PRE OUT jacks as from their corresponding SPEAKERS terminals.
Caution
• To prevent the generation of loud noises or abnormal sounds, make sure the followings before
making connections.
– Remove the power cable of the unit and turn off the external power amplifier before connecting
them.
– When using the PRE OUT jacks, do not connect speakers to the corresponding SPEAKERS terminals.
– When using a pre-main amplifier that does not have the volume control bypass, turn up the volume
of the pre-main amplifier enough and fix it. In this case, do not connect other devices (except the
unit) to the pre-main amplifier.
The unit (rear)
HDMI (HDCP2.2) NETWORK WIRELESS
( 3 NET )
AV 1 AV 2 AV 3 AV 4 AV 5 AV 6 AV 7
(1 BD/DVD)
COMPONENT VIDEO TRIGGER
MONITOR OUT/ Y P P Y AV 2 P P OUT
B R B R
ZONE OUT
B
1
REMOTE RS-232C
12V 0.1A IN OUT
MAX. TOTAL
2
A C
P P
Y AV 1 P B P R Y AV 3 B R
ZONE OUT PRE OUT (SINGLE)
1
2
ZONE 2 FRONT SURROUND SUR. BACK SUBWOOFER CENTER
SPEAKERS
SURROUND SURROUND BACK F.PRESENCE CENTER FRONT
R L R L R L R
EXTRA SP2 EXTRA SP1
SINGLE
ZONE 2 ZONE 2/BI-AMP
a bc d
a
FRONT jacks
Output front channel sounds.
b
SURROUND jacks
Output surround channel sounds.
c
SUR. BACK jacks
Output surround back channel sounds. When using only one surround back speaker, connect the
external amplifier to the SINGLE jack (L side).
d
CENTER jack
Outputs center channel sounds.
AC IN
L
(Example)
Connecting front speakers via an external power amplifier
PRE OUT (FRONT) jacks
HDMI (HDCP2.2)
NETWORK
V 2 AV 3 AV 4 AV 5 AV 6 AV 7
COMPONENT VIDEO TRIGGER
R OUT/
Y P B P R Y AV 2 P B P R OUT
OUT
B
1 REMOTE
12V 0.1A
IN OUT
MAX. TOTAL PR
2
A C
Y AV 1 P P Y AV 3 P P
B R B R
PRE OUT
(SINGLE)
1
2
FRONT SURROUND SUR. BACK SUBWOOFER CENTER
SPEAKERS
ROUND SURROUND BACK F.PRESENCE CENTER
L R L R L
EXTRA SP2 EXTRA SP1
FRONT SUR
SINGLE
ZONE 2 ZONE 2/BI-AMP
The unit (rear)
About external power amplifiers
We recommend using power amplifiers that meet the following conditions.
• With unbalanced inputs
• With volume control bypass (or without volume control circuit)
• Output power: 100 W or more (6 to 8 Ω)
27
En
WIRELESS
( 3 NET )
Main input jack
RS-232C
MAIN IN
L L
R R
FRONT
R L
Amplifier with
volume control
bypass
(such as A-S3000)