Conducting A Hotsync Operation Via Modem; Preparing Your Computer - Palm m500 Series Handbook

Conducting a HotSync operation via
modem
You can use a modem to synchronize your handheld when you are
away from your computer.
Note: The first HotSync operation must be local, using the cradle.
After that, you can perform a modem HotSync operation.
To perform a HotSync operation via modem you need the following:
A modem connected to your computer.
Palm Desktop software configured for use with the modem.
A modem connected to your handheld.
A configuration for the kind of modem connection you want to
make. See "Connection preferences" in Chapter 8 for more
information.

Preparing your computer

There are a few steps you must perform to prepare your computer for
a modem HotSync operation. Be sure to perform these steps before
you leave your office so that your computer is ready to receive a call
from your handheld.
To prepare your Windows computer for a modem
HotSync operation:
1. Confirm that the computer modem is connected and turned on,
and that no communications applications, such as fax or telephony
software, are running on a COM port.
Note: Make sure the computer is disconnected from all
online services, such as America Online (AOL). This helps
to avoid conflicts with the COM port.
2. Start HotSync Manager if it is not already running, and from the
HotSync Manager menu, choose Modem.
3. Adjust the following options as needed.
Page 186 Advanced HotSync® Operations