Transport Position; Operating Position - Husqvarna LC 140 Operator's Manual

Transport position

The handle assembly can be folded to minimize space
needed for transport and storage.
1 Loosen the 2 knobs on the upper part of the handle
and fold the handle backwards.
CAUTION! The upper part of the handle may only be
folded down backwards. If the handle is folded in the
wrong direction there is a increased risk of damaging
the cables.
2 Loosen the lower knobs on both sides of the machine.
3 Slide the knobs to the ends of the grooves on both
sides of the machine.
4 Fold in the engine brake handle towards the handlebar.
5 Fold forward the handle.
72 – English
ASSEMBLING AND ADJUSTMENTS

Operating position

1 Fold in the engine brake handle towards the
handlebar.
2 Raise handles until lower handle section locks into
place in operating position.
3 Slide the knobs up towards the handle until they stop
and a click is heard.
4 Screw on the handle with the knob.
5 Fold up the upper part of the handle and tighten the
knobs on both sides.