Starting And Stopping - Husqvarna LC 48 Operator's Manual

Starting and stopping

WARNING! Note the following before
!
starting:
Do not start a lawn mower unless the cutter
and all covers are fitted correctly. Otherwise
the cutter could come loose and cause
personal injuries.
Always move the machine away from the
refuelling area before starting.
Place the machine on a flat surface. Ensure
the cutting attachment cannot come into
contact with any object.
Keep people and animals well away from the
working area.
Starting
Ensure the ignition lead sits correctly on the spark plug.
• Pull the engine brake handle against the upper handlebar
with your left hand.
• Grip the starter handle, slowly pull out the cord with your
right hand until you feel some resistance (the starter pawls
grip), now quickly and powerfully pull the cord. Never
twist the starter cord around your hand.
CAUTION! Do not pull the starter cord all the way out and do
not let go of the starter handle when the cord is fully extended.
This can damage the machine.
LC 48VE are equipped with electronic start which is used in
the following way.
• Before using the electronic start for the first time you need
to charge the battery. See instructions under the heading
Maintenance.
• Fold in the engine brake handle towards the handlebar.
78 –
English
STARTING AND STOPPING
• Insert the ignition key and push the key.
Drive LC 48VE, LC 48V, LB 48V
The machines are self-propelling with backwheel drive.
To use the drive on the wheel pull the clutch lever towards
you.
The drive can be gradually controlled.
Stopping
Stop the engine by releasing the engine brake handle.
Machines with electric start remove the key.