3M MP8780 Operator's Manual page 37

A.8 Serial Inferface Command Codes (continued)
Function
IR receiver selection
Magnify
PIP
Lamp Timer Reset
Temperature
Error Status
A-14
Downloaded From projector-manual.com 3M Manuals
Code Meaning
Write Codes
D5AW00 Selects Front and Rear IR Receiver
D5AW01 Selects Front IR Receiver
D5AW02 Selects Rear IR Receiver
Read Codes Returns:
D5AR 00-Front and Rear Receiver is selected
01-Front receiver is selected
02-Rear receiver is selected
Write Codes
D5BW00
D5BW01XY to 01:x1, 02:x2, 03:x4, 04:x8, 05:x16, 06:x32, 07:x64
D5BW07XY XYdenotes magnifying portion (00 to FF)
Read Codes
D5BR 00 – Off
01 to 07
Write Codes
D5CW00 Off
D5CW01 ON1
D5CW02 ON2
D5CW03 Refreshes the background for ON1
Read Codes Returns:
D5CR 00 – Off
01 – ON1
02 – ON2
Write Codes
D60W00 Resets the lamp timer
Read Codes Returns:
D60R xxxx-shows lamp operating time in hours (decimal)
Read Codes Returns:
D61R Shows the status of internal temperature
00-Temperature level 0
01-Temperature level 1
02-Temperature level 2
03-Temperature level 3
04-Temperature level 4 (Warning)
05-Temperature level 5 (Power Off)
Read Codes Returns:
D01R 00-No error
01-Interlock error
02-Lamp error
04-Temperature error
08-Fan error
10-Memory error
Note: If there is more than one error, the resulting read code will be the sum
f the error codes listed above. Example: For Interlock-01 and Lamp-02,
resulting read code is 03.
3M ™ Multimedia Projector MP8780 © 3M 1999