A.7 Connection to the Control Signal Terminal (continued)
USB Mouse Cable
This cable is used to connect the projector and computer to allow computer mouse control via the projector's
remote control buttons. Connect the cable, select the input source where the computer is to be connected and start
the mouse functions.
USB Mouse Jack
(B Type)
2
1
3 4
Some laptop computers with a built-in pointing device (track ball) may not recognize the external mouse. In this
case, change the BIOS (system setup) so that an external mouse can be selected. Some computers may not
have the necessary utility program to operate a mouse. Refer to the computer hardware manual.
© 3M 1999
Downloaded From projector-manual.com 3M Manuals
Projector
NC
1
–DATA
2
+DATA
3
GND
4
USB Cable
3M
™
Multimedia Projector MP8780
Computer
1
+5V
2
–DATA
3
+DATA
4
GND
Note
USB Mouse Jack
(A Type)
1
2
3 4
A-9