3M MP8780 Operator's Manual page 35

A.8 Serial Inferface Command Codes (continued)
Function
Contrast
Brightness
Tint (Hue)
Color (Saturation)
Sharpness
Gamma
PC Mode
MAC Mode
Phase
A-12
Downloaded From projector-manual.com 3M Manuals
Code Meaning
Write Codes
D12W00 to D12W14 Set contrast level to a value between 00 and 14 hex.
This corresponds to 20 possible settings.
Read Codes Returns:
D12R 00 to 14 hex
Write Codes
D13W00 to D13W14 Sets brightness level to a value between 00 and 14 hex.
This corresponds to 20 possible settings.
Read Codes Returns:
D13R 00 to 14 hex
Write Codes
D14W00 to D14W14 Sets tint (hue) level to a value between 00 and 14 hex.
This corresponds to 20 possible settings.
Read Codes Returns:
D14R 00 to 14 hex
Write Codes
D15W00 to D15W14 Sets color (saturation) level to a value between 00 and 14
hex. This corresponds to 20 possible settings.
Read Codes Returns:
D15R 00 to 14 hex
Write Codes
D16W00 to D16W14 Sets sharpness level to a value between 00 and 14 hex.
This corresponds to 20 possible settings.
Read Codes Returns:
D16R 00 to 14 hex
Write Codes Sets sharpness level to a value between 00 and 14 hex.
D17W00 to D17W14 This corresponds to 20 possible settings.
Read Codes Returns:
D17R 00 to 14 hex
Read Codes Returns:
D30R 0 to 41 hex
See Computer (RGB) Signal Connection (Section A–5)
00-Shows no input
Write Codes
D32W00 MAC MODE "OFF"
D32W01 MAC MODE "ON"
Read Codes Returns:
D32R 00-MAC MODE is OFF
01-MAC MODE is ON
Write Codes
D34W00 to D34W13 Set phase to a value in the range of 00 to 13 hex.
D35W00 Reset phase to default
Read Codes Returns:
D34R 00 to 13 hex
3M ™ Multimedia Projector MP8780
Default is "OFF"
© 3M 1999