Palm 600 User Manual page 16

Palm treo 600 pcs smartphone user guide
Table of Contents

Advertisement

Setting Up
4. Confirm your Treo is charging by checking the LED. If the battery is fully
drained, it may take a few moments for the LED to turn on while charging.
Red LED: battery is charging.
Green LED: battery is fully charged.
LED off: battery is not charging. Check the cable connection and the outlet to
which it is connected.
After you set up your Treo, the onscreen battery gauge displays power status:
Full battery icon
Partial battery icon
Empty battery icon
Red lightning bolt
Green lightning bolt
Battery life
Battery life depends on individual use. Consumption factors include signal
strength, backlight and speakerphone use, and whether calls are data or voice
calls.
When Wireless Mode is on, the Treo battery provides approximately 4 hours of
talk time or approximately 10 days of standby time on the PCS, 1900 MHz band.
Talk time is slightly lower when roaming on the cellular 800Mhz band. When
Wireless Mode is off, the battery provides about 4 weeks of normal use.
If the battery drains to the point where your Treo doesn't turn on, the Treo stores
your data safely for about 3 days. We recommend that you charge and synchronize
your Treo every day, especially if you use your phone often.
4
: battery is charged.
: battery has some power but is not fully charged.
: battery needs charging immediately.
: battery is charging.
: battery is fully charged.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Treo 600

Table of Contents