Table of Contents
Advertisement
How to use
Cleaner description
27
1
2
14
13
12
11
10
Note: To reduce the risk of electric
shock, this appliance has a polar-
ized plug (one blade is wider than
the other). This plug will fit in a
polarized outlet only one way. If the
plug does not fit fully in the outlet,
reverse the plug. If it still does not
fit, contact a qualified electrician to
install the proper outlet. Do not
change the plug in any way.
6
2
3
14
4
4
5
6
18
2
8
9
7
28
To turn cleaner on, push switch up.
To turn cleaner off, push switch down.
Plug cord into electrical outlet. Turn
cleaner on and, with handle in
upright position, pull back on handle
until front of cleaner is lifted off the
carpet. This insures that the paper
bag is inflated.
The assembled cleaner will look like
the drawing.
1. Handle
2. Cord hooks: wrap cord around
hooks for storage. The top hook
can be rotated right or left for
easy cord
15
3. Bag Cap
4. ON/OFF switch: located on side
of handle
5. Outer bag
6. Stair cleaning handle: located on
16
lower edge of bag.
7. Handle release lever: step on
lever to lower handle to operating
or low position.
8. Cleaner body
9. Nozzle control knob: slide knob
to correct setting for height of car-
pet being cleaned.
17
10. Furniture guard: helps prevent
cleaner from marking furniture.
11. Hood
12. Hose door: open door to connect
hose to cleaner.
13. Hose
14. Tool rack
15. Dusting brush
16. Wand
17. Furniture nozzle
18. Crevice tool
Operate cleaner only at voltage
specified on data plate on bottom
of cleaner.
29
Handle positions
The handle of your cleaner has
three positions; upright for storage
and when using cleaning tools;
operating position for general
operation on carpet and floors; low
for reaching under low furniture.
Step on handle release lever to
lower handle.
release.
Advertisement
Table of Contents
