Technical Data - Weller WX 1 Operating Instructions Manual

Technical Data

Dimensions L x W x H
Weight
Mains supply voltage
Power consumption
Safety class
Fuse
Temperature range
Temperature accuracy
Temperature stability
Equipotential bonding
Display
USB port
Compressed air
Compressed air converter
Compressed air connection
Air flow rate
PK Elektronik Vertriebs GmbH, E-Mail: info@pkelektronik.com, Internet: www.pkelektronik.com
soldering soldering
station station
WX 1 WX 2
170 x 151 x 130 mm
(6,69 x 5,94 x 5,12 inch)
ca. 3,2 kg ca. 3,2 kg
230 V, 50 Hz / 120 V, 60 Hz / 100 V 50/60 Hz
200 W 200 W (255 W)
I, antistatic housing
III, Soldering tool
T2 A (230 V)
T4 A (120 V)
Celsius: 100 - 450°C
Fahrenheit: 200 - 850°F
Controllable temperature range is tool-dependent
± 9 °C (± 17 °F)
± 2 °C (± 4 °F)
Via 3.5 mm pawl socket on back of unit
255 x 128 dots / Backlighting
The control unit has a front-side USB port which you can use for instal-
ling firmware updates, configuring, monitoring and data logging (using
WX Monitor Software).
-
-
-
-
desoldering Hot air station
station
WXD 2 WXA 2
ca. 3,8 kg ca. 3,8 kg
200 W (255 W) 200 W (255 W)
(550°C)
(999°F)
Inlet pressure Inlet pressure
400 - 600 kPA 400 - 600 kPA
(58-87 psi); (58-87 psi) oil
oil-free, dry free, dry com-
compressed air pressed air or
nitrogen (N2)
Air consumption -
35 l / min
max vacuum 55
kPA (8 psi)
Compressed air Compressed air
hose hose
outer diameter outer diameter
6 mm (0,24") 6 mm (0,24")
approx. 0-18 l/
min at 6 bar
29